Hi-Temp Alert

Hi-Temp Alert is a high temperature alarm with internal and remote signaling capabilities. It is used in conjunction with saunas, steam rooms, spas and hot tubs. The alarm is set at a desired temperature. If the temperature rises above the set point, the alarm sounds and interrupts the power to the heating source. The audible part of the alarm can be silenced after it has been activated by high temperature conditions. However, this will not reset the power to the heating source. The heating source can only be reset by an attendant after the system has cooled to a point below the alarm set point.

Features:

  • Safety Interlock – For Manual Reset
  • Independant Alarm Silencer
  • Audio and Visual Alarm Indicators
  • Easy-Low Voltage Installation for New or Existing Installations
  • Probe accurate for 500′ with 18 Gauge Wire
  • Fail Safe Mode
  • Remote Alarm Capabilities
  • Digital Temperature Read Out
  • Interfaces with All Electrically Controlled Heating Sources Including Milli Volt Systems

Specifications:

  • Dimensions – 5″ x 8″ x 1-1/2″
  • Input – 115 volts ac
  • Remote alarm output – 12 volts dc 0.5 amps
  • Relay contact ratings – 10 amps – 115 volts, 5 amps – 230 volts
  • Max power consumption – 15 watts
  • Calibrated accuracy – ±1 F, ±1 LSD
  • Set range – 100° to 200° F
  • Internal audible alarm – 90 db at 4′
  • 1/4″ od x 1-1/2″